Troubleshooting Guide to Fix 192.168.1.1 IP Not Working Issue

Stuck with the Netgear default IP 192.168.1.1 not working issue? If yes, why don’t you ease out the worry lines on your forehead? Oh c’mon! There’s no point in worrying about such a little issue when we are here to assist you. We’ve listed the topmost fixes in this article that’ll help you in troubleshooting the issue at hand.

But, before you learn how to resolve the issue, have a look at the reasons that led to it first. If you cannot reach the login page of your Netgear WiFi router, it might be due to:

  • Improper hardware configuration

  • You might have entered the wrong IP

  • Outdated Netgear router firmware

  • Incorrect 192.168.1.1 admin details

  • An IP issue on your laptop or PC

Considering now you know what might be the possible reasons behind the IP not working issue, proceed further and learn how to fix it.

Troubleshooting: 192.168.1.1 Default IP Not Working

Ping 192.168.1.1 Default IP

Start by checking the connection between your Netgear WiFi router and computer. Are they even connected? To check the connection between your PC and home router, ping 192.168.1.1. Here are the instructions that you need to follow:

  • Press the Windows key on your keyboard.

  • Type cmd in the Search box and hit Enter.

  • The Command Prompt will appear.

  • Then, type ipconfig and press the Enter key.

  • Now, ping 192.168.1.1 default IP.

If you are getting replies on the screen, it means that your PC is properly connected to the router. If not, make a connection between them and try accessing the Netgear router login page again.

Further, you can use the command prompt for coding. Command prompts are also used to clear your PC drive such as a USB flash drive. You can also format USB in Command prompt.

Check Your Cable Connections

Another thing that you need to do in order to fix the 192.168.1.1 default IP not working issue is to check whether all your cable connections are in place or not. Also, while checking your cable connections, consider the points mentioned below:

  • The power cable connecting your router to the adapter should be free of cuts.

  • Your wall socket shouldn’t be damaged from any end.

  • If you’ve used an Ethernet cable to connect your router to the modem, make sure that it is finger-tight. Loose cable connections won’t take you anywhere.

  • If the power LED light hasn’t turned green, it is recommended that you power cycle your Netgear WiFi router.

Enter the Correct Web Address

One of the major reasons why you can’t access 192.168.1.1 default IP is because you might have entered the wrong address. Therefore, make sure that you’re being careful while entering the default IP of your device.

Chances are that the default IP of your Netgear router is 192.168.0.1 while you’re trying to access 192.168.1.1. Thus, to be certain about the default IP of your WiFi device, it is recommended that you take reference from the Netgear manual.

Perform Netgear Firmware Update

Updating the firmware of your device can also help in getting rid of the 192.168.1.1 default IP not working issue. Mentioned below are the steps that you need to follow in order to update the firmware of your Netgear router:

  • Connect your router to the power adapter with a cable.

  • Then, plug the power adapter into the wall socket.

  • Press the Power button on your device and let the LED become green.

  • Open a web browser of your choice on your laptop.

  • Log into your router by using routerlogin.net.

  • Go to the Settings and click on the Firmware Update button.

  • Now, follow the on-screen instructions to update your WiFi device.

So, this was all about how to troubleshoot the issue of 192.168.1.1 default IP not working. We hope that this article was of some help to you in troubleshooting the issue. In case the issue persists, feel free to get in touch with our highly experienced technical experts.

oshobothomas

Develop Indian